Ac Power Cable Connection - NEC VERSA MINIDOCK 6000 Service Manual

2-2 Setup and Operation
Attach one end of the cable to the AC power port on the MiniDock.
2.
Attach the other end to a properly grounded wall outlet.
3.
Locate the main Power switch on the back of the MiniDock. Press the
4.
white dot on the switch to turn on the MiniDock's power. A vertical line
icon above the Power switch indicates that power is on.
Figure 2-1 AC Power Cable Connection
! CAUTION
Make sure the main Power switch on the back of
the MiniDock is powered on before docking the
NEC Versa. Docking the NEC Versa while the
MiniDock is powered off can result in a system
crash. This caution applies to the Windows 95
operating system only.