4
3
2
1
1
back button
4
scroll wheel
7
power switch
2 Power on the mouse by sliding the power switch on the bottom of the mouse to the On position. The
red optical sensor lights when the mouse is on.
3 Press the wireless (Bluetooth) connection button on the bottom of the mouse to put the mouse into
"discover" mode.
4 Click Next on the Wizard within 30 seconds to complete the pairing. The message Your mouse
has been connected and is ready to use displays when the pairing is complete. Use
the mouse to click Finish to complete the pairing.
If the mouse and computer fail to pair, see "Mouse Pairing Failed" on page 30.
Mouse Pairing Failed
If the Mouse Connection Wizard does not launch or repeatedly fails to pair your mouse with the
computer:
1 Ensure the Bluetooth Wizards are enabled. Select Start→ All Programs→ Bluetooth→ Wizards, and
click OK on the Enable Wizards window.
2 Power off the mouse by sliding the switch on the bottom of the mouse to the Off position.
30
Using the Keyboard and Mouse
5
6
2
forward button
5
left mouse button
8
wireless (Bluetooth)
connection button
7
3
wireless light
6
right mouse button
9
optical sensor
8
9