Replacing The Battery Pack; Battery Release Latch - NEC VERSA 2600 Service Manual

The following symptoms indicate that battery life is nearing an end. Discard batteries that
display these symptoms:
T
shorter work times
T
discoloration, warping
T
hot to the touch
T
strange odor.

Replacing the Battery Pack

Replace the battery pack installed in your NEC Versa 2600 system as follows.
Save your files, exit Windows, and turn off system power.
1.
2. Close the LCD and turn the system over.
3. Press the battery release latch and slide the battery out of the system, as shown in
the following figure.
4. Insert the new battery into the bay, pressing it firmly until the release latch clicks.
Battery
Release Latch
Battery
Pack
Figure 2-5

Battery Release Latch

Setup and Operation 2-7