Tap Next and enter the required dial-up telephone
8.
number. Tap Finish.
Once your ISP connection is established you can configure
your MobilePro for sending and receiving email through
your ISP. Follow the instructions in "Sending and Receiv-
ing Email" and "Activating a Connection," later in this
chapter, to send and receive email through your ISP.
For ISP settings, access:
http://www.cewindows.net/wce/isp.htm/. Although not an
official NECC web site, this site contains important infor-
mation about ISP settings.
CONNECTING TO A REMOTE ACCESS SERVER
Once you establish an account with your RAS and gather
the necessary configuration information, you are ready to
create a connection on your MobilePro for your RAS ac-
count.
Follow these steps to create a new connection for your
RAS account.
Tap Start, Programs, Communication, then select Re-
1.
mote Networking.
Double tap the Make a New Connection icon.
2.
Enter a name for the new connection.
3.
Select Dial-Up Connection as the connection type and
4.
tap Next.
Use the dropdown box to select Internal Modem on
5.
COM 4 and tap Configure.
Select the required port settings and call options. Tap
6.
OK.
Tap TCP/IP Settings and configure the required Gen-
7.
eral Settings and Name Servers. Tap OK.
Setting Up a Remote Connection 5-5