Linux; Figure 166 Macintosh Os X: Network - ZyXEL Communications P-660HW-T V2 - VERSION 3.40 User Manual

P-660HW-T v2 User's Guide

Figure 166 Macintosh OS X: Network

4 For statically assigned settings, do the following:
5 Click Apply Now and close the window.
6 Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.

Linux

This section shows you how to configure your computer's TCP/IP settings in Red Hat Linux
9.0. Procedure, screens and file location may vary depending on your Linux distribution and
release version.
292
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your ZyXEL Device in the Router address
box.
Appendix E Setting up Your Computer's IP Address