The following table describes the labels in this screen.
Table 66 Management > Bandwidth MGMT > General
LABEL
Enable Bandwidth
Management
Enable Automatic
Traffic Classifier
Apply
Reset
17.8 Bandwidth Management Advanced Configuration
Click Management > Bandwidth MGMT > Advanced to open the bandwidth management
Advanced screen.
Figure 92 Management > Bandwidth MGMT > Advanced
NBG318S User's Guide
DESCRIPTION
Select this check box to have the NBG318S apply bandwidth management.
Enable bandwidth management to give traffic that matches a bandwidth rule
priority over traffic that does not match a bandwidth rule.
Enabling bandwidth management also allows you to control the maximum or
minimum amounts of bandwidth that can be used by traffic that matches a
bandwidth rule.
This field is only applicable when you select the Enable Bandwidth
Management check box.
Select this check box to have the NBG318S base on the default bandwidth
classes to apply bandwidth management. Real-time packets, such as VoIP
traffic always get higher priority.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
Chapter 17 Bandwidth Management
171