Selecting The Picture Size - Samsung PS-42D7HD Owner's Instructions Manual

Selecting the Picture Size

TV
Picture
Mode : Dynamic
Size : 16:9
Digital NR : On
DNIe Demo : Off
My Colour Control
Energy Saving : Standard
PIP
Move Enter
TV
Size
16:9
Wide 4:3
Zoom
4:3
Move Enter
PC to HDMI Mode
TV
Size
16:9
Wide 4:3
Zoom
4:3
Move Enter
English - 32
You can select the picture size which best corresponds to your viewing
requirements.
1
Press the MENU button.
Result:
2 Press the ... or † button to select Picture.
Result:
Return
3
Press the ENTER (
4 Press the ... or † button to select Size.
Press the ENTER (
5
Select the required option by pressing the ... or † button.
Result:
◆ 16:9
◆ Wide 4:3
Return
◆ Zoom
◆ 4:3
6
Press the ENTER (
➢
◆ You can select these options simply by pressing the SIZE
◆ If you change the picture size when PIP is On, PIP will
Return
◆ Depending on the input source, the SIZE options may vary.
Positioning and Sizing the screen using Zoom
➢
◆ Resizing the screen using the Zoom enables the positioning
◆ Move the screen up/down using the ... or † button after
◆ Resize the screen vertically using the ... or † button after
◆ Screen enlargement operates only in TV/Video/S-Video/
◆ PC/HDMI modes prevent the screen enlargement function.
◆ In PC mode, only 16:9 and 4:3 mode can be adjusted.
The main menu is displayed.
The Picture menu is displayed.
) button.
) button.
The following options are available.
: Sets the picture to 16:9 mode.
: Magnify the size of the picture more than 4:3.
Move the screen up/down using the ... or †
button after selecting the
or ENTER (
: Magnify the size of the picture vertically on
screen.
: Sets the picture to 4:3 normal mode.
) button.
button on the remote control.
automatically be turned Off.
and sizing of the screen to up/down direction using the ... or
† button as well as the screen size.
by pressing the œ or √ button.
selecting the
by pressing the œ or √ button.
selecting the
(Pressing the ... button extends it upward and pressing the
† button extends it downward.)
Component input modes.
by pressing the √
) button.