Channel Control
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
English - 58
1
Press the MENU button.
Press the œ or √ button to select
"Channel", then press the ENTER
button.
2
Press the ... or † button to select
"LNA", then press the ENTER button.
3
Press the ... or † button to select
"Off" or "On", then press the ENTER
button.
Select "Return" by pressing the
... or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
NOTES
• LNA functions only when antenna is set to Air.
The LNA setting must be made separately for each channel.
• If the picture is noisy with the LNA set to On, select Off.
Channel
Return
Antenna
Air
Auto Program
Channel Manager
Fine Tune
Signal Strength
LNA
On
Channel
Enter
Channel
Return
Antenna
Air
Auto Program
Channel Manager
Fine Tune
Signal Strength
LNA
On
Channel
Enter
Channel
Return
Antenna
Air
Auto Program
Channel Manager
Fine Tune
Off
Signal Strength
On
LNA
Channel
Enter