Connecting To The Hdmi Terminal; Selecting The Priority Video Output When Connecting Hdmi And Component Video - Pioneer BDP-330 Operating Instructions Manual

Connections

Connecting to the HDMI Terminal

• You can enjoy high quality digital picture and sound through the HDMI terminal.
• See page 43 for information on the output of next generation audio formats.
• Use High Speed HDMI
not operate properly if other HDMI cables are used.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an HDMI cable (commercially available) to the HDMI terminals ( and ).
2
Rear panel of this Player
• When using an HDMI
output, 7.1 ch Digital
Output is available.

To HDMI OUT terminal
HDMI cable
(commercially available)

To HDMI IN terminal
Projector
Equipment with an HDMI terminal
After connecting
• If desired, connect audio equipment. (Page 20)
• Load a disc and start playback. (Page 28)
• Refer to control function with HDMI. (Pages 26 and 44)
Cables when using the control function with HDMI. The control function with HDMI may
®
USB
USB
Selecting the priority video output when connecting
HDMI and Component video
When you connect both an HDMI cable and a component cable to this
player, you need to select the priority video output in "Settings" – "Audio
Video Settings" – "Video Out Select". (See page 43.)
NOTE
• When you connect the player to a Pioneer TV with an HDMI cable only and the TV
is turned on, the video output switches to HDMI automatically. (The above setting
is unnecessary.)
• When you connect the player to a TV with an HDMI cable, "HDMI Video Out" is set
to "Auto". If you don't get a stable image, select the desired resolution.
When you set "HDMI Video Out" to a setting other than "Auto", you can only
select resolutions that are compatible with the connected TV.
• Refer to "HDMI Video Out" on page 43 regarding the resolutions of the HDMI
video output.
TV AV receiver
NOTE
• Audio transmitted in DTS-HD High
Resolution Audio and DTS-HD Master
Audio formats is output from the
HDMI terminal as Bitstream. Connect
an amplifier with a built-in decoder to
enjoy the fine sound quality.
17