Panasonic OmniVision PV-D4745 Operating Instructions Manual page 9

Front View of DECK
Bold: VCR Function
Italic : DVD Function
Bold Italic : VCR and DVD Functions
Normal: Others
PLAY
p. 20
STOP/EJECT
p. 20
POWER
Audio/Video
Input Connector 2
(LINE 2)
p. 35
REC
p. 21
CHANNEL /
TRACKING/V-LOCK
pp. 4, 21
Reset All Memory Functions
Returns to factory setting. Use if relocating DECK, or if Initial Setup needs to be redone.
• Make sure a tape is not inserted in the DECK.
1 2
If the disc cannot be removed...
First, unplug DECK. Then, prepare a rigid
wire (e.g. an extended paper clip) and,
applying moderate force, insert it straight
into the hole at the base of the tray.
The tray will eject a little. Now, pull the tray
all the way out and remove the disc.
Cassette
Compartment
Light-up
Indicators
p. 11
Remote
Sensor
Over 2 inches
Disc Tray
REWIND / SEARCH /
1
Turn DECK Power on.
2 Press and hold both VCR PLAY
and CHANNEL
more than 5 seconds.
• The power shuts off.
3 Perform "Initial Setup (Ready to Play)"
on page 16.
OPEN/CLOSE
p. 22
PLAY
p. 22
STOP
p. 22
FAST FORWARD
/ SEARCH /
SKIP
p. 20, 23
SKIP
p. 20, 23
on the DECK for
9