To Stop The Transmission - Panasonic Panafax UF-6950 Facsimile Manual

2
Select the desired Transmission
setting.
(See page 23)
4
The same document(s) can be
sent to multiple stations. Select
multiple stations as shown in Step
3a (3b), 3c and/or 3d, and then
press .
START
START
The document(s) is stored into
memory with a file number. Then
the machine starts sending the
document(s).

To Stop the Transmission

1 2
Remove the
document(s) from
the ADF.
3. If you are using Pulse dialing, and you wish to change to Tone dialing in the middle of dialing,
NOTE
press
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9
4. When transmitting at S-Fine or 600 dpi, there is a possibility that printing quality may
deteriorate at the remote station due to its reception capability. If this occurs, re-send with
Direct Transmission or use "Fine" Resolution.
5. You can search for another name starting with the same character by scrolling with the Cursor
Keys (
3a
( Quick Name Search Dialing)
or
3b
One-Touch/ABBR. Dialing
and/or
3c
Manual Number Dialing
and/or
3d
Directory Search Dialing
• If memory overflow occurs while storing originals, the machine will stop, and
the remaining originals will remain on the ADF. In the factory default setting
(Fax Parameter No. 82 (Quick Memory XMT)) is set to "Valid", the machine
will transmit the stored documents automatically when transmitting to one
station. If Fax Parameter No. 82 is set to "Invalid", and transmitting to one
station, the machine will change the transmission mode from Memory to
Direct XMT automatically when it detects that memory overflow will occur.
If set to "Valid", and transmitting to multiple stations, the machine will show
"MEMORY FULL" and prompts you whether to transmit the successfully
stored documents, or to cancel the transmission.
Press "YES" to cancel, or press
1
within 10 seconds, the machine will start transmitting the stored documents.
If memory overflows while storing 1st page, use Direct Transmission.
• An Information Code will be displayed if the transmission has failed, or there
was no answer at the receiving side after the last automatic redial.
The document stored for the transmission will be erased from the memory
automatically, and the information code is printed for the transmission on the
Communication Journal (COMM. JOURNAL).
If you need to retain the incomplete documents even after the last redial,
change the Fax Parameter No. 31 (INC. FILE SAVE) to "Valid" in advance.
(See page 111)
To retry the incomplete documents, refer to page 82.
3
COMMUNICATION STOP?
1:YES 2:NO
STOP
(represented by a "/").
TONE
5551234
PAUSE TONE
/ ).
"NO" to transmit. If no action is taken
2
4
PRINT COMM. JOURNAL?
1:YES 2:NO
: Print Communication
1
Journal and stop the
transmission.
: Stop the transmission.
2
39