Wireless > Wireless Mac Filter - Cisco WRT320N User Manual

Chapter 3
Key Renewal Enter a Key Renewal period, which instructs
the Router how often it should change the encryption
keys. The default Key Renewal period is 3600 seconds.
RADIUS
This option features WEP used in co-ordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router).
Security Mode > RADIUS
IMPORTANT:
If you are using WEP encryption,
always remember that each device in your
wireless network MUST use the same WEP
encryption method and encryption key or else
your wireless network will not function properly.
RADIUS Server Enter the IP Address of the RADIUS
server.
RADIUS Port
Enter the port number of the RADIUS
server. The default value is 1812.
Shared Secret
Enter the key shared between the Router
and the server.
Encryption Select a level
40/64 bits (10 hex digits) or 104/128 bits (26 hex digits).
The default is 40/64 bits (10 hex digits).
Passphrase
Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1 If you did not enter a Passphrase, enter the WEP
key manually.
WEP
WEP is a basic encryption method, which is not as secure
as WPA.
Dual-Band Wireless-N Gigabit Router
of WEP encryption,
Advanced Configuration
Security Mode > WEP
Encryption
Select a level
40/64 bits (10 hex digits) or 104/128 bits (26 hex digits).
The default is 40/64 bits (10 hex digits).
Passphrase
Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1
If you did not enter a Passphrase, enter the WEP
key manually.
Click Save Settings to apply your changes or click Cancel
Changes to cancel your changes.
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of
the wireless devices transmitting within your network's radius.
Wireless > Wireless MAC Filter
of WEP encryption,
16