Preparing A Dvd Writer (Cu-Vd50U); Creating A Disc - JVC Everio GZ-HM860 User Manual

Copying

Preparing a DVD Writer (CU-VD50U)

Connect the USB cable and the AC adapter.
1
Turn off the camcorder by pressing the M button for about 2 seconds.
0
* The AC adapter shown in the illustration is AC-V11U. .
A Connect the USB cable provided with the DVD writer.
B Connect the AC adapter of the DVD writer.
C Connect the AC adapter to this unit.
This unit powers on automatically when the AC adapter is connected.
0
This unit turns on and the "BACK-UP" menu appears.
0
While the USB cable is connected, the "BACK-UP" menu is
0
displayed.
Refer also to the instruction manual of the DVD writer.
0
Turn on the DVD writer and insert a new disc.
2
.
A Press the power button to turn on the power.
B Press the eject button to open the disc tray.
C Pull out the tray completely and load a new disc properly.
D Push the disc tray in until it clicks into place.
Caution :
Be sure to turn off the power when connecting the devices.
0
Otherwise, electric shocks or malfunctions may occur.
Memo :
All buttons on the DVD writer CU-VD50U, other than the power and eject
0
buttons, will not work when connected to this unit.
94

Creating a Disc

Prepare a DVD writer.
1
Insert a new disc into the DVD writer.
0
"Preparing a DVD Writer (CU-VD3U)" (A p. 93)
"Preparing a DVD Writer (CU-VD50U)" (A p. 94)
2 Copy files to the disc with the following methods.
"Copying All Files" (A p. 95)
"Copying Files by Date" (A p. 96)
"Copying Selected Files" (A p. 97)