Casio TE-3000S Dealer's Manual page 169

Batch report
X1/Z1
X2/Z2
Mode switch
: : : :
D D D D
4 3 2 1
File reset
Z1
X2/Z2
Mode switch
Report name
PLU reset (no report)
Scanning PLU reset (no report)
Not found PLU reset (no report)
Not found PLU file reset
Not found PLU maintenance file reset
TE-3000S/4000F/4500F Dealer's Manual
6 : : : : 6 a
D D D D
4 3 2 1
Report code
Note: If you skip to enter the report code, the 1st batch X/Z is executed.
The value (record No. of the batch X/Z file - 1)
In X1 mode,
"Issue daily file report" = 00
"Issue consolidation file report" = 03
In Z1 mode,
"Issue daily file report" = 00
"Issue consolidation file report" = 03
In X2/Z2 mode,
"Issue periodic 1/2 read/reset file report" = 00
(Read/reset and periodic 1/2 are the dependent upon the control flag of the batch X/Z file.)
"Issue periodic 1 file read report" = 01
"Issue periodic 1 file reset report" = 11
"Issue periodic 2 file read report" = 02
"Issue periodic 2 file reset report" = 12
"Issue periodic 1 consolidation file read report" = 04
"Issue periodic 1 consolidation file reset report" = 14
"Issue periodic 2 consolidation file read report" = 05
"Issue periodic 2 consolidation file reset report" = 15
6 : : a
~
Report code
Daily
50014
50026
50027
80027
(incl. program field)
80082
Report code
Periodic 1 Periodic 2
51114 51214
----- -----
----- -----
----- -----
----- -----
169