Installing the Switch
Installation Procedures
Wall mounting the Series 2600-8-PWR Switch
1.
2.
C a u t i o n
The 2600-8-PWR switch can only be wall mounted either with the RJ-45 ports
side up or down (horizontally). A vertical wall mount orientation is not
supported.
2-18
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
Attach the switch to the wall or wood surface with two 5/8-inch number
12 wood screws (not included).
For "Flat" Wall Mounting (Horizontal)
Wall
M4 screws
RJ-45 Ports
5/8-inch
wood screws