Back Of The Switches; Power Connector; Slot For Switch Module (Switch 2424M) - HP J4093A Installation Manual

Introducing the HP ProCurve Switch 1600M and 2424M

Back of the Switches

Back of the Switches
.
HP ProCurve Switch 1600M
HP ProCurve Switch 2424M

Power Connector

The Switch 1600M and Switch 2424M do not have a power switch; they are
powered on when connected to an active AC power source. The switches
automatically adjust to any voltage between 100-127 and 200-240 volts and
either 50 or 60 Hz. There are no voltage range settings required.

Slot for Switch Module (Switch 2424M)

The slot for installing any of the supported switch modules in the Switch
2424M is in the back of the switch. For a description of the modules, see
"Features" on page 1-7.
1-6
AC power connector
cooling vent - make sure this is not
obstructed for proper switch operation
Slot for
Switch Module
(Switch 2424M)