Mls Qos Srr-Queue Output Dscp-Map - Cisco WS-C3560E-24PD-E Command Reference Manual

mls qos srr-queue output dscp-map

mls qos srr-queue output dscp-map
Use the mls qos srr-queue output dscp-map global configuration command to map Differentiated
Services Code Point (DSCP) values to an egress or to map DSCP values to a queue and to a threshold
ID. Use the no form of this command to return to the default setting.
Syntax Description queue queue-id
dscp1...dscp8
threshold threshold-id
dscp1...dscp8
Defaults Table 2-13
Table 2-13
DSCP Value
0–15
16–31
32–39
40–47
48–63
Command Modes Global configuration
Command History Release
12.1(19)EA1
Catalyst 3560 Switch Command Reference
2-270
mls qos srr-queue output dscp-map queue queue-id {dscp1...dscp8 | threshold threshold-id
dscp1...dscp8}
no mls qos srr-queue output dscp-map
Specify a queue number.
For queue-id, the range is 1 to 4.
Map DSCP values to an egress queue.
For dscp1...dscp8, enter up to eight values, and separate each value with a
space. The range is 0 to 63.
Map DSCP values to a queue threshold ID.
For threshold-id, the range is 1 to 3.
For dscp1...dscp8, enter up to eight values, and separate each value with a
space. The range is 0 to 63.
shows the default DSCP output queue threshold map:
Default DSCP Output Queue Threshold Map
Queue ID–Threshold ID
2–1
3–1
4–1
1–1
4–1
Modification
This command was introduced.
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
78-16405-05