Cisco WS-C3020 Software Configuration Manual page 35

Preface
Audience
This guide is for the networking professional managing the Cisco Catalyst Blade Switch 3020 for HP,
referred to as the switch. Before using this guide, you should have experience working with the Cisco
IOS software and be familiar with the concepts and terminology of Ethernet and local area networking.
Purpose
The Layer 3 switch IP base image provides Layer 2+ features including access control lists (ACLs),
quality of service (QoS), static routing, EIGRP and PIM stub routing, and the Routing Information
Protocol (RIP).
This guide provides the information that you need to configure Cisco IOS software features on your
switch. The Cisco Catalyst Blade Switch 3020 for HP software provides enterprise-class intelligent
services such as access control lists (ACLs) and quality of service (QoS) features.
This guide provides procedures for using the commands that have been created or changed for use with
the Cisco Catalyst Blade Switch 3020 for HP switch. It does not provide detailed information about
these commands. For detailed information about these commands, see the Cisco Catalyst Blade
Switch 3020 for HP Command Reference for this release. For information about the standard Cisco IOS
Release 12.2 commands, see the Cisco IOS documentation set available from the Cisco.com home page
at Technical Support & Documentation > Cisco IOS Software.
This guide does not provide detailed information on the graphical user interface (GUIs) for the
embedded device manager that you can use to manage the switch. However, the concepts in this guide
are applicable to the GUI user. For information about the device manager, see the switch online help.
This guide does not describe system messages you might encounter or how to install your switch. For
more information, see the Cisco Catalyst Blade Switch 3020 for HP System Message Guide for this
release and the Cisco Catalyst Blade Switch 3020 for HP Hardware Installation Guide.
For documentation updates, see the release notes for this release.
OL-8915-03
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
xxxv