Cisco WS-C3560-48PS-S Hardware Installation Manual page 74

Installing the Switch
Do not wall-mount the switch with its front panel facing up or sideways. According to safety regulations,
wall-mount the switch with its front panel facing down to prevent airflow restriction and to provide
easier access to the cables.
Figure 3-10
1
Phillips flat-head screws
After the switch is mounted on the wall:
(Optional) Secure the AC power cord. See
1.
2. Power on the switch. See the
3. Connect to a 10/100 or 10/100/1000 port, and run Express Setup. See the Catalyst 3560 Switch
Getting Started Guide for instructions. To use the CLI setup program, see
"Configuring the Switch with the CLI-Based Setup Program."
Connect to the front-panel ports.
4.
Catalyst 3560 Switch Hardware Installation Guide
3-18
Mounting the Switch on a Wall
2
User-supplied screws
"Verifying Switch Operation" section on page
Chapter 3 Switch Installation (8- and 12-Port Switches)
"Securing the AC Power Cord" section on page
1 2
3-19.
3-7.
Appendix D,
OL-6337-07