Casio DISC TITLE PRINER User Manual page 64

Symptom Possible Cause
G Cannot print.
The driver is not installed
correctly.
The printer is not turned
on or there is no
connection between the
printer and computer.
Recommended Action
1. Click Start, Control
Panel, System, and
then Device Manager.
2. Check if CW-E60
Device is displayed
under Universal Serial
Bus controller.
• If you see a question
mark (?) or exclamation
point (!) next to CW-E60
Device, disconnect the
USB cable from your
computer, and re-install
this DISC TITLE
PRINTER application
and the USB driver.
After re-installing,
reconnect the USB
cable.
Make sure the printer is
connected correctly to
your PC.
Make sure the printer is
connected correctly to a
power source.
Symptom Possible Cause
G The last part of
Too many characters per
input data does line
not print.
Too many lines
G Cannot import
The music CD you are
CD-Text. trying to import from
does not have any CD-
Text on it.
Your CD drive does not
support reading of CD-
Text.
G Cannot create a
The specified drive or
data index file. media where you are
trying to save the data is
write protected or full.
Recommended Action
Use a smaller font size or
reduce the number of
characters per line.
Use a smaller font size or
reduce the number of
lines.
Type text manually into
the label input boxes, or
find a Website on the
Internet that contains the
data you want to include
on the label, copy it, and
then paste it into the label
input boxes.
Remove the write
protection or delete data
you no longer need to
make room from the data
index file. Other options
include switching to a
different drive or different
media.
63