Installing The Router - Cisco 2691 - VPN Bundle Router Hardware Installation Manual

Installing the Router

This chapter guides you through the installation of Cisco 2600 series routers and includes the following
sections:
•
Installing Modules, Interface Cards, and Power Supplies, page 3-2
•
Setting Up the Chassis, page 3-3
•
Installing the Chassis Ground Connection, page 3-13
•
Power Connections, page 3-15
•
Connecting WAN, LAN, and Voice Cables, page 3-18
•
Connecting to a Console Terminal or Modem, page 3-20
•
Powering Up the Router, page 3-23
•
Configuring the Router, page 3-25
Warning This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning Before working on equipment that is connected to power lines, remove jewelry (including rings,
necklaces, and watches). Metal objects will heat up when connected to power and ground and can
cause serious burns or weld the metal object to the terminals. Statement 43
Warning This equipment has been designed for connection to TN and IT power systems. Statement 1007
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network
Warning
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some
LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
Warning
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
OL-2171-06
C H A P T E R
Cisco 2600 Series Routers Hardware Installation Guide
3
3-1