Cisco 2651 User Manual page 35

Place the tenth label on the router as shown in
Step 11
so that one half of the label covers the enclosure and the other half covers the power supply plate.
Place the eleventh label on the router as shown in
Step 12
so that one half of the label covers the enclosure and the other half covers the redundant power supply
plate.
Step 13 The labels completely cure within five minutes.
Figure 24
Port adapter
lever
Chassis
grounding
receptacles
The tamper evidence seals are produced from a special thin gauge vinyl with self-adhesive backing. Any
attempt to open the router or remove components will damage the tamper evidence seals or the painted
surface and metal of the module cover. Since the tamper evidence seals have non-repeated serial
numbers, they may be inspected for damage and compared against the applied serial numbers to verify
that the module has not been tampered. Tamper evidence seals can also be inspected for signs of
tampering, which include the following: curled corners, bubbling, crinkling, rips, tears, and slices. The
word "OPEN" may appear if the label was peeled back.
Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, and 3745 Modular Access Routers and 7206-VXR NPE-400 Router FIPS 140-2 Non-Proprietary
OL-6083-01
The Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, 3745, and 7206 VXR NPE-400 Routers
Cisco 7206 VXR NPE-400 Tamper Evidence Label Placement
Blank port adapter
Cisco 7200
Series VXR
I/O controller
PC Card slots
Power supply
filler plate
Network processing engine
or network services engine
Power switch
Figure 24. The tamper evidence label should be placed
Figure 24. The tamper evidence label should be placed
Port adapters
Auxiliary
Optional Fast Ethernet port
(MII receptacle and RJ-45 receptacle)
Internal fans
AC-input
receptacle
NETWORK PROCESSING ENGINE-150
AC-input
power supply
ETHERNET-10BFL
FAST ETHERNET INPUT/OUTPUT CONTROLLER
Console
port port
35