Removing A Pc Card Or Blank - Dell Inspiron 9200 Owner's Manual

Removing a PC Card or Blank

NOTICE:
Use the PC Card configuration utility (click the
stop it from functioning before you remove it from the computer. If you do not stop the card in the
configuration utility, you could lose data. Do not attempt to eject a card by pulling its cable, if one is
attached.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
1
Press the latch and remove the card or blank.
For some latches, you must press the latch twice: once to pop the latch out, and then a second
time to pop the card out.
2
Remove the card or blank.
Save a blank to use when no PC Card is installed in a slot. Blanks protect unused slots from dust
and other particles.
icon in the taskbar) to select a card and
41
Using PC Cards