Table of Contents
Advertisement
DWL-G520M User's Manual
Site Survey - Profile Configuration
When you click Add, Properties or Connect in the Site Survey screen, this popup
screen appears for configuration purposes.
Profile Name:
Wireless Mode:
Channel:
Power Saving:
Auth Mode:
Support Band: Select the wireless mode of your wireless network.
D-Link Systems, Inc.
Enter a name for the network profile here.
SSID:
The Service Set Identifier is the name assigned to the wireless
network. The factory SSID setting is default. You may enter up to
3 SSIDs.
Either Infrastructure or Ad-Hoc will be displayed here. (Please
see the Getting Started section in this manual for an explanation of
these two modes.)
The channel selection is automatically determined by the
DWL-G520M.
Continuous Access Mode is the default setting. For best results leave
this setting at the default.
Select Open, Shared or Auto.
11G - Connect to an 802.11g only network.
11B - Connect to an 802.11b only network.
Check both to connect to an 802.11b/g mixed network.
Using the Configuration Utility
18
Advertisement
Table of Contents
