D-Link DWL-P100 Quick Install Manual page 3

Connecting the DWL-P100 continued
Now connect the provided Cat 5 Ethernet cable from the Terminal Unit "LAN
OUT" to the RJ-45 LAN port of the Wireless Access Point.
Terminal Unit
Wireless Access Point
Finally, insert one end of the DC 5V Power Cable that is provided into the
Terminal Unit, and the other end into the DC 5V/1A of the Wireless Access
Point. The green LED of the Terminal Unit should light up.
Terminal Unit
At this point, your Wireless Access Point should have power and function
normally. (See the back page of this guide for an illustration of the connected
network.)
LAN OUT PWR DC 5V OUT
To LAN port of
LAN OUT PWR DC 5V OUT
To Power Input of
Wireless Access Point
-3-