Wireless Configuration - D-Link DSM-G600 Manual

DSM-G600 User's Manual
Home > Wireless
Network Type:
Wireless Mode:
Dynamic IP:
D-Link Systems, Inc.
Select Wireless to enable wireless functionality.
Client: Select this mode if you will be connecting to an existing wireless
router or access point.
Access Point: Select this mode if wireless clients will be connecting
directly to the DSM-G600.
SSID:
In client mode, you may click Site Survey to select an available wireless
AP or router. If you already know the SSID, you can enter it manually.
Mode:
Select 802.11g or 802.11b mode.
Channel:
Select a wireless channel between 1-11.
Security:
Select WEP or WPA-PSK.
Select to obtain an IP address from a DHCP server.
Static IP:
Select to manually assign an IP address. When you select this option
you will fill out the fields below.
Static IP Address: Enter the IP address in this field
Subnet Mask: Enter the subnet mask
Gateway Address: Enter the gateway address. (The
address of the router in your network).
DNS Address: Enter the IP address of the DNS server here.
Using the Configuration Utility
30