Setting Up The Dp-G310 - D-Link DP-G310 Manual

DP-G310 User's Manual
WARNING:
connection. Follow this procedure to avoid complications at the configuration stage.
1. Confirm proper operation of your printer before connecting the DP-G310.
2. When you have confirmed proper operation of your USB printer, turn your printer power OFF.
3. Confirm that your network is operating normally.
4. Connect the DP-G310 to your network, using a straight-through CAT5 cable.
5. While the printer is powered OFF, use the USB printer cable to connect the DP-G310 to your USB
printer.
6. Switch ON your USB printer.
7. Plug the DC power adapter into the DC 5V power socket on the rear panel of the Print Server.
8. Plug the power adapter into a power outlet. This will supply power to the DP- G310, as it has no
external power switch. The green Power LED on the Print Server's front panel should illuminate
steadily, and the Print Server's Self-Test will proceed.
D-Link Systems, Inc.

Setting up the DP-G310

Configuration problems may result if the Print Server is powered up without first establishing its network
Installing the Print Server
Setting up the DP-G310
9