Defining Trap Management; Defining Trap Settings; Configuring Station Management - Cisco SFE1000P Administration Manual

Defining Trap Management

The Defining Trap Management section contains the following pages:
•

Defining Trap Settings

•

Configuring Station Management

• Defining SNMP Filter Settings
Defining Trap Settings
The Trap Settings Page contains parameters for defining SNMP notification parameters.
1. Click System > SNMP > Security > Trap Management > Trap Settings. The Trap Settings Page
opens:
2. Define the relevant fields.
3. Click Apply. The trap settings are modified, and the device is updated.
Configuring Station Management
The Station Management Page contains information for defining filters that determine whether traps
are sent to specific users, and the trap type sent. SNMP notification filters provide the following
services:
• Identifying Management Trap Targets
• Trap Filtering
• Selecting Trap Generation Parameters
• Providing Access Control Checks
Chapter 12: Configuring SNMP
Defining Trap Management
SFE1000P Gigabit Ethernet Switch Administration Guide
Trap Settings Page
Chapter
12
93