Cisco ME 3400 Command Reference Manual page 87

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
For physical interfaces:
•
•
When you define a range, you must enter a space before the hyphen (-), for example:
gigabitethernet0/1 - 2
You can also enter multiple ranges. When you define multiple ranges, you must enter a space after the
first entry before the comma (,). The space after the comma is optional, for example:
fastethernet0/3, gigabitethernet0/1 - 2
fastethernet0/3 -4, gigabitethernet0/1 - 2
Examples This example shows how to create a multiple-interface macro:
Switch(config)# define interface-range macro1 fastethernet0/1 - 2, gigabitethernet0/1 - 2
Related Commands Command
interface range
show running-config
OL-9640-07
module is always 0.
the range is type 0/number - number (for example, gigabitethernet 0/1 - 2).
Description
Executes a command on multiple ports at the same time.
Displays the operating configuration. For syntax information, use this
link to the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_com
mand_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to
navigate to the command.
Cisco ME 3400 Ethernet Access Switch Command Reference
define interface-range
2-61