Firmware Update; Encryption Type - Buffalo WLA2-G54C User Manual

4.3.11 AOSS
AOSS (AirStation One-Touch Secure System) - Display the clients that are connected to the AirStation by A.O.S.S.
4.3.9 Initialization/Reboot
Initialization sets all parameters back to factory defaults. After
initialization, the AirStation must be restarted.

4.3.10 Firmware Update

Firmware File Name - Enter the path and fi lename for
new fi rmware or select Browse to search for the path.
Click Firmware Update to load fi rmware to the
AirStation.
■ Note: Firmware update does not erase current user
settings.
• Name : Shows client's name.
• MAC address : Shows client's MAC address.
• Encryption type : Available encryption type of the client.
• Status : Shows current client's connection.
• Operation : Connect/disconnect the clients.
■ Note: Once disconnect button is clicked, the client's MAC
address is listed in MAC fi lter table.
■ Note: The maximum number of MAC fi ler table is 64.
Current encryption Information - Display encryption
level and security information.
• Security level :Current encryption level is displayed.
• SSID : Current SSID is displayed. Depending on encryption
level.
• Encryption key/pre-shared key : Current encryption data.
Depending on encryption level.

Encryption Type

Encryption level can be changed manually, when AOSS function
is activated.
Confi rm whether every clients can access before confi guring
this setting.
The following encryption levels can be selected.
(High security)AES - TKIP - WEP128 - WEP64(Low security)
Enable/disable AOSS button
12