Dual Access (Black & White Only); Real Time Transmission - Brother MFC-9840CDW User Manual

Brother mfc-9840cdw: users manual
Hide thumbs Also See for MFC-9840CDW:
Table of Contents

Advertisement

Chapter 5
Color
Standard:
Suitable for most typed documents.
Fine:
Use when the document is a photograph.
The transmission time is slower than
Standard resolution.
If you choose S.Fine or Photo and then
use the Color Start key to send a fax, the
machine will send the fax using the Fine
setting.
Dual access
(black & white only)
You can dial a number, and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
• Your machine normally uses dual access.
• If you get an Out of Memory message
while scanning the first page of a fax,
press Stop/Exit to cancel scanning. If you
get an Out of Memory message while
scanning a subsequent page, you can
press Black Start to send the pages
scanned so far, or press Stop/Exit to
cancel the operation.
40

Real time transmission

When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialing and
sending.
If the memory is full or you are sending a color
fax, the machine will send the document in
real time (even if Real Time TX is set to
Off).
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax:On for the next fax only.
5
Sending in real time for all faxes
a
Make sure you are in Fax mode
b
Press Menu, 2, 2, 5.
22.Setup Send
5.Real Time TX
a
On
b
Off
Select ab or OK
c
Press a or b to choose On.
Press OK.
Sending in real time for the next fax
only
a
Make sure you are in Fax mode
b
Press Menu, 2, 2, 5.
22.Setup Send
5.Real Time TX
a
On
b
Off
Select ab or OK
c
Press a or b to choose Next Fax:On.
Press OK.
Note
In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
5
5
.
5
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents