Advertisement
(5) Select the "Mastered" option.
3. Turn on your BRC3109 and load the CD you've just burned.
4. The BRC3109 should recognize the new software on your CD. If your BRC3109 is not already up
to date it will bring up instructions for you to follow (skip to Step 6 below). If your BRC3109 is
up to date, you're done! Congratulations! No need to proceed with further steps.
5. Manual Update: Only perform steps a, b and c if you feel that the BRC3109 has not recognized
that a software update is available, and you feel that the downloaded software might be a
newer version.
a) Press the SETUP button on your BRC3109 Remote Control, and then select the
"General" menu.
b) Select the "Software Update" option. You should see a "Choose device -> Disc"
option – select this.
c) BRC3109 will display a screen indicating the version number of current software and
the version number of the downloaded software. Only proceed with updating if the
version number of the current software on BRC3109 is older (smaller number) than
the downloaded version.
6. You'll then see a "Software Update" screen. Please be patient during this process, follow the
instructions onscreen instructions carefully, and ensure that you DO NOT turn off the product
during this process.
7. Once the update is complete, you'll see a message asking you to restart the BRC3109 – please
do so. (Note: the BRC3109 may restart automatically).
8. Congratulations! You've now completed the update process!
Page 4
BRC3109 Software Update Instructions
Advertisement
