Pioneer GEX-INNO2BK - 1 GB, XM Radio Tuner Install Manual

What's in the box?
™ CD-INCAR2
inno car kit
car cradle remote car antenna power adapter cassette XM SureConnect mounts cleaning kit
adapter
™
inno car kit
Listen to Live XM and recorded XM content*
Play MP3 and WMA files
Manage your tracks, favorite
channels, and playlists
Listen in your vehicle
Car Kit CD-INCAR2 is not compatible
with GEX-INNO1 and was designed to
work with GEX-INNO2BK only
*Hardware and required monthly subscription sold separately. Installation cost and other fees and taxes, including a
one-time activation fee may apply. Subscription fee is consumer only. XM products, programming, services, and fees are
subject to change, at any time, without notice. Channels with frequent explicit language are indicated with an XL. Channel
blocking is available for XM radio receivers by calling 1-800-XM-RADIO. Subscriptions subject to Customer Agreement
available at xmradio.com. XM service only available in the 48 contiguous United States. ©2006 XM Satellite Radio Inc.
All rights reserved.
How to install the antenna
Every vehicle is different; for your safety, follow all instructions carefully. Consult a
professional installer if you have questions.
Keep excess cable behind
or under the dashboard.
Mount the antenna to the roof or trunk of the vehicle. During installation, make sure
you are outdoors and not obstructed by tall buildings.
Warning: Failure to properly install the antenna may result in injury to
yourself or to others if it becomes detached during an accident.
Setup: In Vehicle
Choose the best way to mount your car cradle.
How to use the swivel mount
To install the swivel mount, first find a suitable location. The swivel mount's adhesive
is very strong and may be difficult to remove. Do not install this mount on leather
surfaces and make sure the air temperature is at least 60ºF.
1. Clean the mounting surface with the
surface preparation kit. Peel away the
adhesive liner.
Peel off adhesive liner
How to receive XM through your car stereo
Plug in all of the connectors once
you have mounted the radio, power
installed the antenna or used the
line out
included XM SureConnect and
plugged in the power adapter.
XM Antenna or
XM SureConnect
The line out should be used with (See included XM
the included cassette adapter for SureConnect guide for
more information)
the best sound quality.
1. Insert your inno into the car cradle.
2. Turn your inno player on.
3. Turn on your car stereo. Look for a
channel that sounds like it is receiving a
weak or no station. (88.1 - 107.9).
4. On your inno player press the XM
button. Scroll down to "Settings" choose
"FM Modulator" then pick "FM Frequency."
You may be in either "Live XM" or "My
Music" modes. (You will not hear any
music in the "My Music" mode unless you
have recorded content or mp3s).
5. Follow the on screen instructions to choose the
same frequency as you chose on your car
stereo. You should now be able to hear XM
through your car stereo.
2. Firmly press the swivel mount to the surface for 30 seconds. Allow 24 hours
before using the mount.
Either orientation may be used.
You can adjust the tension of
the mount with a screwdriver.
Be careful not to loosen it too
much when you are adjusting it,
or the swivel may come apart.
(not included)
If you need to remove the mount, carefully lift the adhesive pad with your fingers or a
spoon. Warming with a hair dryer for several minutes will help soften the adhesive.
Protect your ears
- Take care so that the earbud cable is not caught by your arm or other objects while
walking or exercising.
- Do not turn up the volume too high. Doctors warn against prolonged exposure to
high volume.
- Stop using your inno or turn the volume down if you have ringing in your ears.
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes
of sound. So what sounds "normal" can actually be loud and harmful to your hearing. Set
your equipment at a safe level BEFORE your hearing adapts.
To establish a safer level: Start your volume control at a low setting; Slowly increase
the sound until you can hear it comfortably and clearly, without distortion.
Once you have established a comfortable sound level: Set the dial and leave
it there; taking a minute to do this now will help to preserve hearing.
Pioneer and the Consumer Electronics Association recommend you avoid prolonged exposure
to excessive noise. Under constant exposure such as sustained listening, sound levels above
85 decibels can be dangerous without hearing protection. (For reference, a garbage disposal
or loud shouting at 3 feet away are around 80 decibels; a food blender or gas lawn mower at
3 feet away are around 90 decibels.) The longer your exposure and/or higher the sound level,
the greater the danger of permanent hearing damage. Pioneer disclaims all liability for
hearing loss, bodily injury or property damage as a result of use or misuse of this product.
On all complaints and concerns call Customer Support at 1-800-421-1404
For hook-up and operation of your unit or to locate an Authorized Service Company, please call or write:
PIONEER ELECTRONICS SERVICE, INC.
P.O. BOX 1760, LONG BEACH, CALIFORNIA 90810
1-800-421-1404
www.pioneerelectronics.com
How to use the vent mount
To install the vent mount, find a horizontal vent that is strong enough to hold your
inno and its car cradle.
1. To insert the vent mount,
push it into the vent as shown.
To remove the vent mount, push
it into the vent and lift upwards
slightly to release the mount's hooks
from the vent vane.
Installed vent mount
or
2. Attach the car cradle to either
mount by sliding it into place.
FCC Statement
Please note that the power cable that has been supplied with your device is supplied with permanently
attached ferrite beads. It is the responsibility of the user to use the power cable with the ferrite beads.
The user is cautioned that changes or modifications not expressly approved by XM Satellite Radio Inc. can
void the user's authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the installation instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna of the affected receiver.
- Increase the separation between the XM equipment and the affected receiver.
- Connect the XM equipment into an outlet on a circuit different from that to which the
affected receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: The FCC and FAA have not certified the inno Satellite Radio Receiver for
use in any aircraft (neither portable nor permanent installation). Therefore, XM
Satellite Radio cannot support this type of application or installation.