D-Link DI-524 Owner's Manual page 88

Frequently Asked Questions (continued)
How do I set up my DI-524 router to use iChat? -for Macintosh users-
(continued)
Step 3
Create a new
firewall rule:
Click Enabled.
Enter a name
(ichat1).
Click Allow.
Next to Source,
select WAN under
interface.
In the first box,
enter an *.
Leave the second
box empty.
Next to
Destination,
select LAN under
interface.
Enter the IP
Address of the
computer you are running iChat from.
Leave the second box empty. Under Protocol, select UDP. In the port range boxes,
enter 5060 in the first box and leave the second box empty.
Click Always or set
a schedule.
Step 4
Click Apply
and then Continue.
Step 5
Repeat steps 3 and 4
enter ichat2 and
open ports 16384-
16403 (UDP).
88