D-Link AirPlus DI-524 Owner's Manual page 50

Networking Basics
Assigning a Static IP Address
in Windows XP/2000
 Click on Internet Protocol
(TCP/IP)

Click Properties
Input your IP address and

subnet mask. (The IP
Addresses on your network
must be within the same
range. For example, if
one computer has an IP
Address of 192.168.0.2,
the other computers should
have IP Addresses that are
sequential, like 192.168.0.3
and 192.168.0.4. The subnet
mask must be the same for
all the computers on the
network.)
Select Use the following
IP address in the Internet
Protocol (TCP/IP) Properties
window (shown below)
Input your DNS server
addresses. (Note: If you
are entering a DNS server,
you must enter the IP
Address of the Default
Gateway.)
The DNS server information will be supplied
by your ISP (Internet Service Provider.)
Click OK
50