Presetting Stations - Yamaha TSX-20 Owner's Manual

TUNER OPERATIONS

Presetting stations

The unit can preset station frequencies selected by
Automatic tuning or Manual tuning. Up to 40 stations can
be stored. With this function, you can select any desired
station by pressing the corresponding preset station
number.
STANDBY/ON OPEN/CLOSE
NATURAL SOUND
MEMORY AUTO/MAN´L PRESET/BAMD
TIME ADJ TIMER
PHONES SLEEP DISPLAY
PRESET/BAND
MEMORY
ABCDE
SLEEP
BASS/TREBLE
FREQ/RDS
PRESET
MUTE
To preset stations manually
1
Tune in a desired station.
(Refer to the previous page for the tuning procedure.)
2
Press MEMORY.
• "MEMORY" and "PRESET" flash on the display
for about 5 seconds.
18
PRESET/TUNING
PRESET/TUNING
HOUR
CD RECEIVER
INPUT
SNOOZE
PRESET STEREO AUTO RDS PSPTYRTCT REP TOTAL PROG TONE
TIMER SLEEP MEMORY TUNED PTY HOLD S F RANDOM B. BOOST
MIN
A/B/C/D/E
INPUT
STANDBY/ON
B. BOOST
LEVEL
RTY SEEK
MODE START
TUNER
ABCDE PRESET
PRESET
INPUT
INPUT
DISPLAY
VOL
3
Before "MEMORY" goes out, press A/B/C/D/E
repeatedly to select the desired group (A to E) of
preset stations.
4
Before "MEMORY" goes out, use PRESET/
TUNING
to 8).
Group
/
5
Press MEMORY.
• "MEMORY", "PRESET", and the preset number
appears on the display.
The arrow appears for one second when
the displayed station is preset successfully.
HOUR
MIN
A/B/C/D/E
6
Repeat steps 1 to 5 until all desired stations are
preset.
Notes
• A new station can be preset in place of a previous one.
• The preset stations are retained for a week after you disconnect
the AC power cord or if a power failure occurs.
To preset stations automatically
1
/
Select TUNER as the input source by pressing
INPUT.
2
Press MEMORY for about 2 seconds.
• The unit starts presetting stations, "AUTO" and
"MEMORY" flash on the display.
Received stations are stored to A1, A2...A8 sequentially.
After 40 stations or all FM and AM stations are stored, the
display will show the station preset on A1.
To recall a preset station
1
Select TUNER as the input spurce.
2
If "PRESET" is not lit on the display, press
PRESET/BAND to light it.
3
Select the desired preset station number by using A/
B/C/D/E and PRESET/TUNING
unit (or ABCDE and PRESET
control).
/
to select a desired preset number (1
Preset number
PRESET STEREO
MEMORY TUNED
PRESET
STEREO
MEMORY TUNED
/ on the main
/
on the remote