Page 1
ROUTER Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. POF 1300 ROUTER GB / IE / CY Operation and Safety Notes Page Operation and Safety Notes Kompernaß GmbH Burgstraße 21 D-44867 Bochum (Germany) Last Information Update: 10 / 2007 ·...
Router bit set / scope of application ................ Page 11 Inserting a router bit ....................Page 12 Connecting a dust / chip vacuum extraction device ..........Page 12 Attaching the vacuum extraction adapter (with reducer piece) ......Page 13 Operation Switching on / off ......................
Introduction The following icons / symbols are used in this instruction manual: Read instruction manual! Safety class II Wear hearing protection, dust protection mask, Observe caution and safety notes! protective glasses and protective gloves. Caution – electric shock! Keep children and other unauthorised personnel Dangerous electric current –...
1 Guide bushing (see Fig. E) switched off or is running but is not actually in use. 1 Guide fence (see Fig. C) This can result in a much lower vibration load over 1 Vacuum extraction adapter (incl.
There is the danger of fire when working with electrical devices that have a dust bag or can be connected to a vacuum extraction device. Under certain condi- tions the wood dust in the dust extraction bag (or in the vacuum‘s filter bag) can self-ignite,...
By do- Frequently check the condition of the device, mains lead and plug. ing this you will be in a better position to control Check the condition of the plug and mains lead the device in unforeseen circumstances.
Warning! Be aware that persons operating If a dangerous situation arises, pull the mains the tool or in its vicinity may be at risk of being plug immediately out of the mains socket. in contact with or inhaling dusts.
Preparing for use concealed cable or the device’s mains lead. Contact with an electrical lead or cable means that the metal parts of the device may also be- Router bit set / scope come live and this can result in electric shock.
6 mm collet for router bits with a 6 mm shank. Now insert the router bit. At least 20 mm of its shank must be inserted. Dovetail cutter bit, with two cutting edges: Tighten the tightening nut (...
Warning: Always pull the mains plug is out Set the required rotational speed using the of the socket before doing any work on the device. thumbwheel for speed preselection This precaution is intended to prevent you from unintentionally starting the device.
“0” point aligns with the justment knob for depth of cut. (1 division = marking on the housing. 0.1 mm / 1 revolution = 1.5 mm) max. + - 8 mm 5. Turn the step buffer until it engages in the movement.
Routing with the guide bushing Note! When using the guide bushing, the template must have a minimum thickness of 8 mm. Note! The template must be at least as thick as the guide bushing ring of guide bushing Note! Choose a router bit with a smaller diameter than the internal diameter of the guide bushing.
Carry out the routing process using uniform m Warning! Pull the mains lead out of the mains speed and pressure (see Figs. F, G). After the routing process lift the device from the socket before you clean the device, otherwise there workpiece and switch it off.
EU Low Voltage Directive (2006 / 95 / EC) Electromagnetic Compatibility (2004 / 108 / EC) Type / device description: Parkside Router POF 1300 Bochum, 31.10.2007 Hans Kompernaß - Managing Director - We reserve the right to make technical modifications in the course of further development. GB/IE/CY...