Part Names - Hitachi FT-01B User Manual

Part names

Adjusting knob
This knob is used to adjust the height and angle of the infrared laser beam.
Laser
■ This device is classified as a class 1 laser product.
• If the laser beam is pointed directly at the eyes, it can cause an eye
injury.
• Do not look directly into the laser output port.
• Do not point the laser beam towards people.
FT-01B
USB (B-type) mini-connector
This is connected to the option
port of the projector.
Laser output port
This is the window where the infrared
laser beam is output.
Cover
This is a protective cover that is mounted
after installing and adjusting the Finger
Touch Unit.
Laser evaluation standard:
IEC60825-1: 2007
Internal Laser Specifications
Max. Output : 220mW
Wave Length : 842nm
WARNING
9