Before First Use; Daily Use - Electrolux EW6T4613HA User Manual

9.4 Factory Reset
This function allows to restore the factory
default options. To activate this option follow
steps below:
1. Switch the appliance on by pressing
Marche/Arrêt button.
2. Turn the programme knob to the
Synthétiques programme (3rd position
clockwise).
3. Press and hold the Essorage and Temp.
buttons for some seconds (within 10
seconds after the switching on. After
these 10 seconds, the key combination

10. BEFORE FIRST USE

1. Make sure that the electrical power is
available and the water tap is open.
2. Pour 2 litres of water into the detergent
compartment marked by
This action activates the drain system.
3. Pour a small quantity of detergent into the
compartment marked by

11. DAILY USE

WARNING!
Refer to Safety chapters.
11.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press button Marche/Arrêt to activate the
appliance.
A short tune sounds.
11.2 Loading the laundry
1. Open the appliance lid.
4. The display will show
If the procedure does not work (due to
timeout, wrong programme dial position
or wrong keys combination), switch the
appliance off and repeat sequence from
the beginning.
4. Set and start a programme for cotton at
This removes all possible dirt from the drum
.
and the tub.
.
2. Push the button A.
The drum opens automatically.
3. Put the laundry in the drum, one item at a
4. Shake the items before you put them in
Make sure not to put too much laundry in the
drum.
activates and deactivates the acoustic
signals).
seconds.
the highest temperature without any
laundry in the drum.
time.
the appliance.
for about 5
A
ENGLISH 19