Table of Contents
Advertisement
Utilizingthe Audio-VideoOutput
of AnotherAV Component
Selecting External Input
When a component
is connected
to the video or audio
input jacks on this unit as described on pages 17 and 18.
it is possible to select the input from that unit. By doing
this, you can combine the audio of the connected
component
with the video of this player or the video of
the connected
component
with the audio of this player,
or you can even select both the audio and video input
from the connected
component(s).
Make selections
in the Setup screen General menu
[External Input] setting in the "Expert"
menu mode
(page 40).
The input jacks on this player can be used for external
audio and/or video input from a separate component.
Additionally, when these kind of connections
are made,
it is possible to mix and match the audio and video
inputs as you like.
Make audio and!or video connections
to the input jacks
on this unit as described in the previous section 'Master-
Slave Connections'.
• Select the audio or video input from the component(s)
connected
to the input jacks on this unit in the Setup
screen Genera) menu [External Input] setting in the
"Expert"
menu mode (pages 40 and this page).
• When Master-Slave
connections
are made to a
second Pioneer DV-F727 player, it is not possible to
make connections
to a separate component
even if
some jacks are not being used by the Slave player.
Notes
• It is not possible to select two aud_ or _o
_d_
sources at
the same _me.
• If a _d_
signal is being input from an e)_er_lly
connected
component
and SETUP is pressed on the remote, the *_d_
signal of the player will appear while the Setup screen is open.
This is not a malfunction.
• When external input connections are made, do nor make any
connections to the MASTER-SLAVE
CONTROL jacks.
Settings:
Off*
Audio
Selects the audio output from the connected
component.
Video
Selects the video output from the connected
component.
Audio and Video
Selects both the audio video output from the
connected component.
• Factorysetting
Notes
• It is not possible to combine wvo video or two audio sources.
• When "Audio and Video" is selected, there is no output from
this unit.
• When Master-Slave
connection
is made, this setting cannot be
selected.
• The output of the connected
component(s) is not input when
the power of the player is turned off.
• If a video signal is being input from an externally connected
component and SETUP is pressed on the remote, the video
signal of this unit will appear while the Setup screen is open.
This is not a rnalf uection.
68
Advertisement
Table of Contents
