Information Code; Technical Specifications - Samsung MS32DG4504A Series User Manual

Hide thumbs Also See for MS32DG4504A Series:
Table of Contents

Advertisement

Problem
Turntable
While turning, the
There is no roller ring,
turntable comes
or the roller ring is not
out of place or
properly in place.
stops turning.
The turn table
The roller ring is not
drags while
properly in place, there
turning.
is too much food, or the
container is too large and
touches the inside of the
microwave.
The turn table
Food residue is stuck to
rattles while
the bottom of the oven.
turning and is
noisy.

Information code

Information code
CAUSE
Control buttons
SE
are pressed over
10 seconds.
NOTE
If the suggested solution does not solve the problem, contact your local SAMSUNG
Customer Care Centre.
User_MS32DG4504ATTC_DE68-04755K-00_EN.indd 25
User_MS32DG4504ATTC_DE68-04755K-00_EN.indd 25
Cause
Action
Install the roller ring and then
try again.
Adjust the amount of food and
do not use containers that are
too large.
Remove any food residue
stuck to the bottom of the
oven.
Action
Clean the keys and check if there
is water on the surface around
key. If it occurs again, turn off the
microwave oven over 30 seconds
and try setting again. If it appears
again, call your local SAMSUNG
Customer Care Centre.

Technical specifications

SAMSUNG strives to improve its products at all times. Both the design specifications
and these user instructions are thus subject to change without notice.
Model
Power source
Power consumption
Microwave
Output power
Operating frequency
Dimensions (W x H x D)
Outside (Include Handle)
Oven cavity
Volume
Weight
Net
MS32DG4504A***
230 V ~ 60 Hz AC
1500 W
100 W / 1000 W - 7 levels (IEC-705)
2450 MHz
520 x 300 x 410 mm
357 x 255 x 357 mm
32 liter
14.6 kg approx.
English 25
2/7/2024 3:27:32 PM
2/7/2024 3:27:32 PM

Advertisement

Table of Contents
loading

Table of Contents