Before Using For The First Time; Starting An Empty Washing Cycle - Bosch WGA244ZREG User Manual And Installation Instructions

Before using for the first time

6 Before using for the
first time
Prepare the appliance for use.
Before using for the first time
6.1 Starting an empty wash-
ing cycle
Your appliance was inspected thor-
oughly before leaving the factory. To
remove any residual water, run the
first wash cycle without any laundry.
Turn the programme selector to
1.
⁠ Drum Clean
Close the door.
2.
Pull out the detergent drawer.
3.
Add washing powder that contains
4.
a bleaching agent to compart-
ment II.
To prevent foaming, use only half
of the amount of detergent recom-
mended by the detergent manufac-
turer for light soiling. Do not use
detergent suitable for woollens or
delicates.
Push in the detergent drawer.
5.
Press ⁠ Start/Reload to start the
6.
programme.
a The display shows the remaining
programme duration.
a After the programme has ended,
the display shows: End.
.
‫الحلة‬ ‫تنظيف‬
Before using for the first time en
Start the first wash cycle or set the
7.
programme selector to Off / ‫ إیقاف‬to
switch off the appliance.
→ "Basic operation", Page 30
19