Adding Laundry; Cancelling The Pro- Gramme; Resuming The Programme When The Programme Status Is Rinse Hold; Unloading The Laundry - Bosch WGG254Z0GB User Manual And Installation Instructions

a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "End".
13.9 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press Start / Reload.
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 21
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press Start / Reload.
5.
13.10 Cancelling the pro-
gramme
Press Start / Reload.
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high, start
the Spin programme or select a
suitable programme for draining.
→ "Programmes", Page 24
Remove the laundry. → Page 31
3.
13.11 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the Spin programme or a pro-
1.
gramme for draining the water.
→ "Programmes", Page 24
Press Start / Reload.
2.
13.12 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.13 Switching off the appli-
ance
Turn the programme selector to
1.
Off.
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the appliance door and de-
4.
tergent drawer open so that resid-
ual water can evaporate.
Basic operation en
31