Delay Start - Electrolux 6 Series Service Manual

4.2.5 Delay start

Press this button to postpone the selected programme start.
Once you have pressed this button, the related LED is lit and the display shows .
To increase the time, press the button repeatedly or hold it down: the time will change in 30-minute steps for
up to 90 minutes max, then the time will change in one-hour steps up to a maximum of 20 hours.
When a delayed start is set, the icon stays lit for the entire duration of the cycle.
To begin the countdown, press the Start/Pause button, the display will show the minutes left until the
cycle starts.
After the countdown begins, you can stop it at any time by pressing the On/Off button.
Technical Support - A.D.L. 26/76 599 74 12-74 Rev.01