Table of Contents
Advertisement
2100F12 User Manual
5.8.2 IPv6 WAN Settings
In this page, user can enable or disable IPv6 function. Meanwhile, user can set WAN Connection
Type and the type of DNS.As shown in Figure 5-69
Figure 5-69
5.8.3 IPv6 LAN Settings
In this page, user can choose the Autoconfiguration Type. As shown in Figure 5-70.
Figure 5-70
5.9 System
5.9.1 Maintenance
5.9.1.1 Reboot
This function enables you to restart the CPE. Settings take effect only after the CPE restarts. To
restart the CPE, perform the following steps:
50
Advertisement
Table of Contents
