Table of Contents
Advertisement
Registering a handset
You can register up to 2 handsets to your DCTG 692 base station and up to 4 handsets to your DCTG 695 base
station. One handset can be registered to only one base at a time.
1.
Press the MENU key.
Select SETTINGS and press the OK key.
2.
Select REGISTER and press the OK key.
3.
Before you enter the PIN, press and hold the PAGING key on the base for 4 seconds. A registration
4.
tone will be emitted (DCTG 695 only).
The base is full
If the base is full, it cannot take on any more handset. You will hear a reject tone instead (DCTG 695 only) and
you will not be able to register any more handset. See the section below Un-registering a handset to delete a
currently registered handset.
5.
Enter the PIN code.
6.
Press the OK key.
Successful registration
You will hear a confirmation tone if the registration is successful. The handset label and the handset number will
be displayed.
Unsuccessful registration
If the registration is not successful, the handset registers back to its original base unit, or SEARCHNG is
displayed if it has lost link with its original base, or NOT REG is displayed if it is registering for the first time.
Follow the procedure and try again.
Un-registering a handset
A handset can un-register another handset registered to the same base. It cannot un-register itself.
Press the MENU key.
1.
Select SETTINGS and press the OK key.
2.
Select DEL HS and press the OK key.
3.
4.
Select the handset you would like to un-register and press the OK key.
5.
Enter the PIN.
6.
Press the OK key to confirm.
20
www.philips.com/faqs/dect
9
System
SYSTEM
Advertisement
Table of Contents
