Resettingsoundfields To The Initial Settings - Sony STR-DG600 Operating Instructions Manual
Multi channel av receiver
Hide thumbs
Also See for STR-DG600:
- Operating instructions manual (96 pages) ,
- Quick setup manual (2 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Resettingsoundfields to
the initial settings
Be sure to use the buttons
on the receiver
for
this operation.
1,2
2
2
Press I/_ to turn off the power.
"TURNING"
and "OFF"
appears
on tile
display
alternately
and then
"COMPLETE"
appears.
While holding down 2CH, press
I/_.
"S.F. CLR." appears
on tile display
and all
sound fields are reset to their initial
setting.
Listening to FM/AMradio
You can listen to FM and AM broadcasts
through
the built-in
tuner. Before
operation,
make sure you ha'_e connected
the FM and
AM antennas
to the receiver
(page
29).
Tip
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 3.
Area code
FM
AM
U, CA
lOOkHz
lO kHz'
: The AM tuning scale can be changed (page 85).
60 us
Advertisement
Table of Contents
