Charge The Battery; Shortcuts Function; Dual Sim - Philips CT9A9WBLK User Manual

Hide thumbs Also See for CT9A9WBLK:
Table of Contents

Advertisement

communicated to you by your network operator or
retailer. For more information on PIN codes, see
"Call Setup" on page 35.
If you enter an incorrect PIN code three times in
succession, your SIM card will be locked. To unlock it, you
must obtain the PUK code from your network operator.

Charge the battery

Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert will
warn you when the battery reaches low. Once you have
installed the battery, you can start charging the phone.
Plug in the charger connector as shown below. Then
plug the other end into a mains AC power socket.
8
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll. It
takes around 3 hours to fully charge the battery.
When all the scroll bars are steady, the battery is fully
charged. You can then disconnect the charger.
Depending on the network and condition of use, talk
time and stand-by time can go up to 8 hours and 1
month respectively.
Keeping the charger plugged to the mobile phone
when the battery is fully charged will not damage the
battery.
The only way to turn off the charger is to unplug it, so use
an easily accessible AC power socket. You can connect
the charger to an IT supply.

Shortcuts function

Your phone provides 10 quick access to the functions
on your phone. You can modify the shortcuts
according to your needs. For more information, see
"Shortcuts" on page 34.

Dual SIM

The dual SIM feature in 9@9w mobile phone allows
you to install two different SIM cards into one mobile
phone. You can switch between two numbers/
networks. For more information, please refer "Dual
SIM" on page 35.
Getting Started

Advertisement

Table of Contents
loading

Table of Contents