Deactivate The Ringer; Activate The Vibra Alert; Read Your Mobile Phone Number - Philips CT3328-BBUSA0P2 Manual

Deactivate the ringer

If you don't want your phone to ring when you receive a call, you can deactivate
the ringer. In this case, the incoming call symbol flashes when you receive a call,
Silence
the display shows
ringer, proceed as follows:
1
2
L

Activate the vibra alert

If you have set the function, your phone vibrates when receiving an incoming
call (activating the silent mode via the
Vibra alert
will also activate the vibra alert). Otherwise, proceed as follows:
1
2
L

Read your mobile phone number

To read your own mobile phone number, press
Own
number is displayed if present on your SIM card. If not, select New, then follow
the instructions.
L
Main features
20
• It is possible to accept or reject a call even when the keypad is locked. The
keypad is unlocked automatically when the phone receives a call, and then
re-locks again once the call is finished.
Incoming
,
Press and select
<
Move until the volume is set to Silence.
Silent mode can also be set by selecting
the vibra alert is also activated. For faster access, you can assign a hotkey to this
function.
In idle screen, press
< >
Move or to select
Activating the vibra doesn't mute the ringer. If you want to mute it and keep the
vibra function on, activate the
num., then press
If your own number has been stored in the Phonebook, you can read it during a
call. See "Consulting the Names list" page 18.
call, but the phone doesn't ring. To deactivate the
Settings > Sounds
Quick Settings
Silence
,
and select Settings
On or Off and press
Silence mode as described above.
,
, select Show and press
> Ringer volume.
> Silence. In this case,
Quicksetting as described above
> Sounds > Vibra.
,
to confirm.
-
when in idle mode and select
,
again. Your phone