Locking The Machine; Cleaning And Care - Philips CRYSTAL 650 User Manual

Printing an Job
Press MENU/OK and 74. Use / to select the job
you would like to print, and press OK.
Printing the Job List
Press MENU/OK and 75. The machine will print
out a list of all pending jobs.
²
Return to the last menu entry with C; return
to the starting mode with X.

Locking the Machine

With the locking function, you can prevent unauthor-
ised persons from using your multifunction machine.
Saving the Lock Code
You must first enter a code for activating or deactivating
the lock function.
Press MENU/OK and 811.
1
2 Use the number keypad to enter a four-digit lock
code, then press OK.
3 Enter the code again for confirmation, then press
OK.
²
If you have already saved a code, you must
first enter the old lock code before you can
change it.
Activating the Keypad Lock
Press MENU/OK and 812.
1
2 Enter the code you previously saved and press
OK.
Use / to select ON and press OK.
3
²
The keypad lock is activated. Only after en-
tering of the correct code will it be possible
to access functions or enter numbers. The lock
will turn itself back on again automatically after
each use.
Deactivating the Keypad Lock
Enter the code you previously saved and press
1
OK.
Press MENU/OK and 812.
2
Enter the code you previously saved and press
3
OK.
Use / to select OFF and press OK. The keypad
4
lock is deactivated.
12. Troubleshooting

Cleaning and Care

Your multifunction machine is designed for low-main-
tenance operation and requires very little care. Discon-
nect the machine from the power supply before clean-
ing!
²
If the power supply is interrupted (e.g. after
a power failure), you must enter the date and
time again.
Cleaning the Machine Surface
Use a soft, lint-free cloth for cleaning. Special cleaning
cloths are available from our order service (see back page
of this user manual). Never use liquid or easily flamma-
ble cleansers (sprays, abrasives, polishes, alcohol, etc.),
to prevent damaging the painted parts!
Æ
The inside of the machine requires no clean-
ing. Do not allow any moisture to reach the
interior of the fax machine.
Cleaning the Scanner Glass
Open the scanner cover.
1
2 Carefully wipe the scanner glass with a lint-free
cloth.
3 Close the scanner cover.
51